工作原理 WORKING PRINCIPLE :
两个标纸盘放上同样长度的标纸。需要贴标的瓶子输送到送瓶轨道（或从流水线其他设备上直接输送过来），瓶距调节机构的看瓶光电传感器挡瓶电磁铁将瓶子等距离拉开，瓶子有间隔地向贴标区移动，接近贴标区的瓶子，在夹送瓶机构和压瓶顶机构夹持下，平稳前行。当瓶子经过光纤电传感器时，步进电机得到讯号开通，两边的标纸卷筒纸盘上的送标电机转动，标纸通过送标机构自动送标，标纸定位光电传感器根据每张标纸的长度定位，使标纸拉出一张标纸的长度，在起标处自动剥离，在贴标部件和滚贴机构的压标部件作用下，两边的标纸同时同步平整地侧贴到两边瓶身的平面上，完成整个贴标过程。
Two standard paper plates with the same length of the paper, The bottle need to label sent to the orbit(or directly from other equipment in the assembly line ), increase the distance between the bottles through the bottle distance regulating mechanism, the bottle move to the labeling area with interval, the bottle close to the labeling, smoothly forward at the top of the pinch bottle agencies and pressure bottle clamping down. When the bottle via electrical sensor, Stepper motor get the signal and open, the sending motor turn, two sides of standard paper sent automatically, the marking paper positioning photoelectric sensor according to the length of marking paper, the label pulled out a certain length, automatic stripping. under the action of pressure lable, two sides of the label affixed to the flat bottle top plane and finish the whole process.
技术参数TECHNICAL PARAMETERS :
|
名称 Name |
TB-3B |
|
适用范围 Application |
各种方形、圆形物体 Any Round and Square Bottle |
|
产能 Capacity |
以平面贴标的长度为10cm为例，100瓶/分 Example：length of the single label is 10cm Max. Capacity: 100 BPM |
|
电源及功率 Power supply and consumption |
220V/50HZ 0.5kw |
|
尺寸 Size |
2400*600*900 mm |
|
设备主要材质 Material |
SS304 |
|
控制系统 Control System |
MCU |
|
压缩空气 Pressed Air Supply |
0.6 Mpa |
|
重量 Weight |
350kg |
|
备注 Remark |
双面贴标 Double Side Faces Label |
主要特点MAIN FEATURES :
（1）兼容性强，适用于各种圆形或方形物体；
（2）走标采用张紧设计，即能保证打码质量，也能准确的控制标纸长度和起标均匀度。
（3）采用预放标系统，出标稳定，贴标平整性好，位置精度高；
（4）滚压标纸对不同的瓶型，采用不同的方式，保证贴标的质量；
（5）中文或中英文对话控制板面，可存储十组品种参数，调节、使用特别方便；
（6）全自动运行，与上、下道工序智能联控，协调性好，无需专人操作，节约人工；
（7）控制芯片为美国原装进口，光电传感元件为台湾生产，稳定耐用。
1. Wide applicability, used for all kinds of round and flat bottles
2. Label-feeding adopt tension design to ensure that the coding quality, and can
accurately control the length and uniformity of the label.
3. Label pre-feeding system makes the label feeding stable, stickup smoothly and label
position precise.
4. The label-rolling and label pressing adopt different structure by different bottles shape
to ensure the quality of the labeling.
5. In Chinese or Chinese-English menu, can store 10 groups set parameters, easy to
adjust and use.
6. Automatically operation, Intelligent control procedure, no need special worker and
save labor.
7. Microchip chip is from U.S, photoelectric element is produced by TAIWAN, Stable and
durable.
原理：
当瓶子经过光纤电传感器时，步进电机得到讯号开通，两边的标纸卷筒纸盘上的送标电机转动，标纸通过送标机构自动送标，标纸定位光电传感器根据每张标纸的长度定位，使标纸拉出一张标纸的长度，在起标处自动剥离，在贴标部件和滚贴机构的压标部件作用下，两边的标纸同时同步平整地侧贴到两边瓶身的平面上，完成整个贴标过程。
产品优势：
ISO , CE 认证，GMP 标准，双标贴标，多功能贴标 ，适用各种造型瓶身，瓶顶贴标
贴标签机
